Vous n'êtes pas identifié.
Bonjour à tous
j'ai un problème d'allumage des feux de taxiway
j'en ai 3 sur 4 qui s'allument
j'en ai 2 sur les roues avant et un côté gauche
comment faire pour allumer celui de droite
et puis je n'ai plus de strobe ni autre lumiere sauf éclairage intérieur
pas d'empennage non plus
voici ce que j'ai transcris depuis leur site
merci beaucoup de votre aide
[lights]
//Types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit, 5=landing, 6=taxi
light.0= 3, -111.35, 0.00, 7.80, fx_shockwave_navwhi_l,
light.1= 2, -111.35, 0.00, 7.50, fx_shockwave_strobe_l,
light.2= 1, 50.60, 1.45, 17.90, fx_shockwave_beaconh,
light.3= 1, 50.60, -1.45, 17.90, fx_shockwave_beaconh,
light.4= 1, 8.30, -0.40, -11.80, fx_shockwave_beaconb_l,
light.5= 4, 110.00, 0.00, 7.25, fx_shockwave_vclighth,
light.6= 6, 53.00, 17.00, -2.50,
fx_shockwave_landing_light,
light.7= 6, 53.00, -17.00, -2.50, fx_shockwave_landing_light,
light.8= 6, 105.00, 0.00, -12.50, fx_shockwave_landing_light,
light.9= 6, 105.00, 0.00, -9.00, fx_shockwave_landing_light_double,
light,10= 5, 53.00, 17.00, -3.50, fx_shockwave_landing_light_small_xenon,
light,11= 5, 53.00, -17.00, -3.50, fx_shockwave_landing_light_small_xenon
Hors ligne
Je rebondis sur ce post pour essayer de résoudre mon problème sur le manque de feu d'atterrissage sur le Piper de A2A. Voilà mes données... comparées à celle de Barrowman, j'aligne celle que j'ai sous P3D v2.2. Si cela peut aider à trouver des solutions merci d'avance.
[LIGHTS]
//Types: 1=beacon, 2=strobe, 3=navigation, 4=cockpit
//light.0 = 3, 0.21, -15.00, 0.55, fx_a2a_cherokee180_navred //Moved to the MDL
//light.1 = 3, 0.21, 15.00, 0.55, fx_a2a_cherokee180_navgre //Moved to the MDL
//light.2 = 3, -14.95, 0.00, 4.89, fx_a2a_cherokee180_navwhi //Moved to the MDL
//light.3 = 2, 0.00, -15.00, 0.55, fx_a2a_cherokee180_strobe //Moved to the MDL
//light.4 = 2, 0.00, 15.00, 0.55, fx_a2a_cherokee180_strobe //Moved to the MDL
//light.5 = 1, -13.37, 0.00, 5.29, fx_a2a_cherokee180_beacon //Moved to the MDL
light.0 = 9, 0.65, 0.00, 2.10, fx_a2a_cherokee180_vclight_red
light.1 = 10, 0.35, 0.00, 1.85, fx_a2a_cherokee180_vclight
Cordialement Roger
Hors ligne