#1 [↑][↓]  03-03-2012 13:43:48

Toubib
Pilote confirmé
Lieu: LFRB
Date d'inscription: 17-03-2008

[FSX] Autopilot de Dirk Fassbender

Bonjour à tous,

je suis en train d'installer  l'autopilot de Dirk Fassbender sur mes hélicos FSX. Pour l'instant out fonctionne bien et j'essaye d'assigner certaines commandes du pilote auto de Dirk sur les boutons de mon joystick. Pour cela j'ai récupéré sur son site un fichier de configuration (hap.cfg) qui permet de connaître les touches du clavier que l'auteur a programmé. Seulement, dans la dernière mise à jour de son autopilot, Dirk à rajouté un module permettant les translations en stationnaire. Il me semble comprendre que l'on peut assigner cette partie à des touches, mais je ne trouve pas comment compléter son fichier.
Quelqu'un connait-il les lignes à compléter dans le fichier hap.cfg ? Pour info, voici le contenu du fichier de config original:

This is a setup of the HAP.CFG which has no problems with the default FSX key assignments.
It should work on any keybord, only the layout in your country maybe different as you can see
with the Ä and Ö. In the example you see the German, English and Norwegian keys.

[AUTOPILOT]
yaw_tc_bias -0.01
allow_rht_reset
allow_hdg_reset
allow_ias_reset
allow_vs_reset
tdwn_hover_height 10

[INPUT]
ALT KEYB 7 0 0 //6
VS KEYB 11 0 0 //0
APP KEYB 15 0 0 //TAB
NAV KEYB 51 0 0 //Comma
GS KEYB 40 128 0 //CTRL + Ä , CTRL + ', CTRL + æ
STAB KEYB 6 0 0 //5
HOV KEYB 10 0 0 //9
HDG KEYB 8 0 0 //7
IAS KEYB 39 128 0 //CTRL + Ö, CTRL + ;, CTRL + ø
HOV_UP KEYB 36 0 128 3 //Shift + J
HOV_DOWN KEYB 49 0 128 3 //Shift + N
HDG_LEFT KEYB 39 0 128 3 //Shift + Ö, Shift + ;, Shift + ø
HDG_RIGHT KEYB 40 0 128 3 //Shift + Ä, Shift + ', Shift + æ
IAS_INCREASE KEYB 7 128 0 3 //CTRL + 6
IAS_DECREASE KEYB 8 128 0 3 //CTRL + 7
VS_INCREASE KEYB 46 128 128 3 //CTRL + SHIFT + C
VS_DECREASE KEYB 47 128 128 3 //CTRL + SHIFT + V
TRIM_LEFT KEYB 203 0 0 3 //Left
TRIM_RIGHT KEYB 205 0 0 3 //Right
TRIM_UP KEYB 200 0 0 3 //Up
TRIM_DOWN KEYB 208 0 0 3 //Down
FD_DISENGAGE KEYB 9 128 0 //CTRL + 8
GO_AROUND KEYB 34 128 128 //CTRL + SHIFT + G
TDN KEYB 10 128 0 //CTRL + 9
CRHT KEYB 15 0 128 //Shift + TAB
CRHT_DOWN KEYB 41 0 128 3 //Shift + Grave
CRHT_UP KEYB 11 0 128 3 //Shift + 0
ALTA KEYB 2 128 128 //CTRL + Shift + 1
ALTA_DECREASE KEYB 3 128 128 3 //CTRL + Shift + 2
ALTA_INCREASE KEYB 4 128 128 3 //CTRL + Shift + 3

//GS_FORWARD
//GS_RESET_FB
//GS_BACK
//GS_RIGHT
//GS_RESET_LR
//GS_LEFT



BG_COLOUR 2 2 2


* Note: If the FSX default key assigments for NUM 2, NUM 4, NUM 6 and NUM 8 are used
the hover repositioning will not work properly. Either you delete the FSX default
assingments or you have to use other in FSX unused keys in the HAP.CFG


Les dernières lignes en bleu concernent le module translation apparemment.

Merci d'avance aux pros de l'autopilot hélico wink


INTEL I7 2600K @4.4Ghz/ ASUS P8Z68V-PRO / 8 Go RAM / NVIDIA GTX570 / Seven x64 / SAITEK X-52 / SAITEK PROFLIGHT CESSNA YOKE

Hors ligne

 

#2 [↑][↓]  03-03-2012 23:16:00

philouplaine
Copilote
Lieu: Toulouse
Date d'inscription: 07-06-2010
Renommée :   69 

Re: [FSX] Autopilot de Dirk Fassbender

Bonsoir Toubib!

Ben on je n'ai pas ces lignes, une petite remarque en passant: Dirk Fassbender a-t-il rogrammé des touches d'un clavier AERTY ou d'un clavier QWERTY??

Bons vols
Philippe


ouaf ouaf ! bon toutou !!

Hors ligne

 

#3 [↑][↓]  04-03-2012 13:21:12

Toubib
Pilote confirmé
Lieu: LFRB
Date d'inscription: 17-03-2008

Re: [FSX] Autopilot de Dirk Fassbender

Bonjour,

je vous mets un lien vers ce fichier hap.cfg hap.cfg .

L'auteur a codé ses touches en QWERTY. Après avoir cherché, si on prend la ligne
IAS KEYB 39 128 0 //CTRL + Ö, CTRL + ;, CTRL + ø
en clavier AZERTY, le CTRL + ;  correspond au CTRL + M

Je n'ai toujours pas trouvé d'infos concernant la translation, je pense contacter l'auteur pour avoir un petit éclaircissement.

Bons vols


INTEL I7 2600K @4.4Ghz/ ASUS P8Z68V-PRO / 8 Go RAM / NVIDIA GTX570 / Seven x64 / SAITEK X-52 / SAITEK PROFLIGHT CESSNA YOKE

Hors ligne

 

#4 [↑][↓]  01-06-2015 15:14:47

Mric29
Commandant de bord
Date d'inscription: 29-04-2009

Re: [FSX] Autopilot de Dirk Fassbender

Bonjour,
je vais déterrer le post car j'ai installé les dernières Màj de cet utilitaire mais malgré la présence de la gauge de translation EC225AFCP.GAU, elle n'apparaît pas dans le panel.cfg !!! Du coup, elle ne s'affiche pas...
Si quelqu'un a une idée, je suis preneur.
Merci
Mric

//——————————————————–

[Window 0X]
Background_color=0,0,0
size_mm=300,360
window_size_ratio=1.000
position=0
visible=1
ident=81
window_size= 0.300, 0.360
window_pos= 0.650, 0.360

gauge00=AS532AFCP!Annunciator,0,0,300,110
gauge01=AS532AFCP!AFCP,0,112,300,134,D:FSXSimObjectsRotorcraftRobinson_R22hap.cfg
gauge02=AS532AFCP!GS,0,247,300,113

//——————————————————–

https://youtu.be/RyPBYUo14Lc

Dernière modification par Mric29 (01-06-2015 15:18:06)


Antec P280, Seasonic S12G 550w, Asus ROG Maximus VII, Intel i7 4790K 4Ghz, Corsair H60, Crucial Ballistix sport DDR3 16 Go,  Samsung Syncmaster S23B300, 7  Fam. Premium 64, Asus Geforce GTX970,  SSD Crucial 256Go, Seagate Barracuda 2To Sata III, Thrustmaster T16000, Saitek proflight throttle quadrant.

Hors ligne

 

#5 [↑][↓]  01-06-2015 16:23:02

esmdu
Pilote Virtuel
Lieu: Metz 59/02
Date d'inscription: 15-03-2008

Re: [FSX] Autopilot de Dirk Fassbender

slt

exemple:..!!solv_gif

Bonsoir,

POur ceux qui utilise le Super Frelon sous FsX (mais cela fonctionnera aussi sous Fs9) j'ai modifié le fichier panel.cfg pour y inclure le pilote automatique HC075DI_AFCP_UPDATE.zip disponible chez hovercontrol. Ce pilote autommatique a été créé par  Dirk Fassbender.

http://64.34.169.161/cgi-bin/ifolio/ima … p;bool=and

Mais avant tout faites une copie de sauvegarde du fichier panel.cfg original sous un autre nom.

[ ] Il vous faudra placer le dossier AFCP de ce paquetage dans le dossier Sud-Aviation_Super-Frelon_SA321 (et non dans le dossier panel)
[ ] Placer les fichier gauge fourni avec le paquetage dans le dossier gauges de FsX.
[ ] Wditer le fichier pannel edt remplacer la section [Window07] par la suivante


[Window07]
Background_color=0,0,0
size_mm= 300,300
window_size_ratio= 1
position=6
visible=0
ident=47

gauge00=AS532AFCP!AFCP,  1,110,300,131, AFCP\afcp.cfg
gauge01=AS532AFCP!Annunciator,  0,0,300



gauge02=HAP!HAP,  0,0,8,8, AFCP\ap1.cfg
gauge03=Super_Frelon_Instr!Close_Subpanel,   280,   2,  17,  17,  c47



[ ] Remplacer la section [Window08] par la suivante


[Window08]
Background_color=0,0,0
size_mm=1024,768
position=1
visible=1
ident=MINIPANEL
render_3d_window=1
window_size= 1.000, 1.000
window_pos= 0.000, 0.000
child_3d=1

gauge00=Super_Frelon_Instr!Airspeed,                           10,  60, 100, 110
gauge01=Super_Frelon_Instr!Altimeter,                          10, 180, 100, 110
gauge02=Super_Frelon_Instr!Vertical_Speed,                     10, 295, 100, 110
gauge03=Super_Frelon_Instr!Rotor_RPM,                          10, 411, 100, 110
gauge04=Super_Frelon_Instr!VOR1_Indicator,                    891,  60, 120, 135
gauge05=Super_Frelon_Instr!Triple_Indicator,                  876, 209, 135, 120
gauge10=Super_Frelon_Instr!Homing_Indicator,                  741, 195, 130, 135

gauge11=AS532AFCP!AFCP,         740, 415, 280, 130, AFCP\afcp.cfg
gauge12=AS532AFCP!Annunciator,  740, 335, 280,  80

gauge09=Super_Frelon_Instr!Radio_Altimeter,                    10, 526, 100, 100

[ ] Sauvegarder les modifications

L'ami André nous a déjà fait un exposé très détaillé sur l'utilisation de ce pilote automatique. J'espère qu'll a conservé sa documentation et qu'il pourra nous en faire profiter à nouveau.

Bons vols virtuels

Benoit

esmdu a écrit:

slt 2L76 et à tous...
suite à mail.. wink
Helicopter AUTOPILOT for FSX System routine Masterpiece © 2007 by Antti Pankonen.

[b]Installation à respecter
..   blink

AFCP.CFG à mettre dans FSX main folder\FSX racine
AP1.CFG à mettre dans FSX main folder \fsx racine


HAP.GAU à mettre dans le dossier  'FSX Gauges'  -> à n'utiliser qu'une fois dans panel
AS532AFCP.GAU à mettre dans le dossier  'FSX Gauges'  -> multiple use allowed

Window07=Autopilot[/b]

//--------------------------------------------------------
[Window07]
Background_color=0,0,0
size_mm=300,300
window_size_ratio=1.000 
position=0
visible=1
ident=80
window_size= 0.300, 0.330
window_pos= 0.700, 0.360

gauge00=AS532AFCP!AFCP,0,130,300,131,afcp.cfg <-----
gauge01=AS532AFCP!Annunciator,0,0,300,130
gauge02=HAP!HAP,193,132,8,8,ap1.cfg


Je suis entrain de modifier un panel pour ec135 ,j'y ai inclu un afcp...
(Ce panel ne fonctionne pas en 3D car les mdl en ma possession sont prévus pour le panel type ec145..)

Dernière modification par esmdu (02-06-2015 10:09:06)


YA ne ponimayu russkiy..!!
Les morts se moquent d'être vengé(s),,,,,,

Hors ligne

 

#6 [↑][↓]  01-06-2015 22:00:39

Mric29
Commandant de bord
Date d'inscription: 29-04-2009

Re: [FSX] Autopilot de Dirk Fassbender

blink ... Merci Esmdu, j'ai dû faire une boulette quelque part ! ...


Antec P280, Seasonic S12G 550w, Asus ROG Maximus VII, Intel i7 4790K 4Ghz, Corsair H60, Crucial Ballistix sport DDR3 16 Go,  Samsung Syncmaster S23B300, 7  Fam. Premium 64, Asus Geforce GTX970,  SSD Crucial 256Go, Seagate Barracuda 2To Sata III, Thrustmaster T16000, Saitek proflight throttle quadrant.

Hors ligne

 

#7 [↑][↓]  02-06-2015 10:04:03

esmdu
Pilote Virtuel
Lieu: Metz 59/02
Date d'inscription: 15-03-2008

Re: [FSX] Autopilot de Dirk Fassbender

re
test avec le cb3001

http://image.noelshack.com/fichiers/2015/23/1433232061-hfcp1.jpg

http://image.noelshack.com/fichiers/2015/23/1433232209-hfcp.jpg


YA ne ponimayu russkiy..!!
Les morts se moquent d'être vengé(s),,,,,,

Hors ligne

 

#8 [↑][↓]  02-06-2015 11:00:56

Mric29
Commandant de bord
Date d'inscription: 29-04-2009

Re: [FSX] Autopilot de Dirk Fassbender

Voilà ! J'ai comme toi Esmdu et on devrait avoir la gauge 'EC225AFCP.GAU', comme ça !

http://img11.hostingpics.net/thumbs/mini_498391autopilot.jpg

Dernière modification par Mric29 (02-06-2015 11:12:10)


Antec P280, Seasonic S12G 550w, Asus ROG Maximus VII, Intel i7 4790K 4Ghz, Corsair H60, Crucial Ballistix sport DDR3 16 Go,  Samsung Syncmaster S23B300, 7  Fam. Premium 64, Asus Geforce GTX970,  SSD Crucial 256Go, Seagate Barracuda 2To Sata III, Thrustmaster T16000, Saitek proflight throttle quadrant.

Hors ligne

 

#9 [↑][↓]  02-06-2015 15:17:52

esmdu
Pilote Virtuel
Lieu: Metz 59/02
Date d'inscription: 15-03-2008

Re: [FSX] Autopilot de Dirk Fassbender

slt
tu parles de ça  ?

gauge00=as532_hover!hover,  18,33,267,194 cool

http://image.noelshack.com/fichiers/2015/23/1433251001-afcp5.jpg

Dernière modification par esmdu (02-06-2015 15:19:02)


YA ne ponimayu russkiy..!!
Les morts se moquent d'être vengé(s),,,,,,

Hors ligne

 

#10 [↑][↓]  03-06-2015 01:05:16

Mric29
Commandant de bord
Date d'inscription: 29-04-2009

Re: [FSX] Autopilot de Dirk Fassbender

Bsr,
dans l'ancienne version du pilote automatique il y avait le bloc supérieur correspondant à la gauge As532AFCP.gau. Dans la dernières version avec translation, la gauge EC225AFCP.gau fait son apparition, elle doit correspondre à la partie que j'ai cerclée de rouge mais elle n'apparaît pas puisque aucune ligne du panel.cfg ne la mentionne... d'où mon interrogation! Comment faire apparaître cette satanée commande de translation ?
Bnn


Antec P280, Seasonic S12G 550w, Asus ROG Maximus VII, Intel i7 4790K 4Ghz, Corsair H60, Crucial Ballistix sport DDR3 16 Go,  Samsung Syncmaster S23B300, 7  Fam. Premium 64, Asus Geforce GTX970,  SSD Crucial 256Go, Seagate Barracuda 2To Sata III, Thrustmaster T16000, Saitek proflight throttle quadrant.

Hors ligne

 

#11 [↑][↓]  03-06-2015 01:15:31

Mric29
Commandant de bord
Date d'inscription: 29-04-2009

Re: [FSX] Autopilot de Dirk Fassbender

Ah... je viens de trouver ça sur 'simviation',  j'ai zappé la dernière étape et je n'ai pas modifié le DLL.XML j'essaierai demain !

1) Extract the folder "Gauges" and the files "hap.cfg and HAPX.DLL" in the folder
   main Microsoft Flight Simulator X.


2) Add the codes below in the file "Aircraft.cfg, Panel.cfg and DLL.XML" helicopter
   to which you want to integrate the Auto-Pilot.

===============================
    Aircraft.cfg
===============================

[autopilot]
autopilot_available=1
flight_director_available=1
default_vertical_speed=0.001
autothrottle_available=1
pitch_takeoff_ga=0.000000
autothrottle_arming_required=1
autothrottle_takeoff_ga=0
autothrottle_max_rpm=90.000000
max_pitch=10.000000
max_pitch_acceleration=1.000000
max_pitch_velocity_lo_alt=2.000000
max_pitch_velocity_hi_alt=1.500000
max_pitch_velocity_lo_alt_breakpoint=20000.000000
max_pitch_velocity_hi_alt_breakpoint=28000.000000
max_bank=25.000000
max_bank_acceleration=1.800000
max_bank_velocity=3.000000
max_throttle_rate=0.100000
nav_proportional_control=9.000000
nav_integrator_control=0.250000
nav_derivative_control=0.000000
nav_integrator_boundary=2.500000
nav_derivative_boundary=0.000000
gs_proportional_control=9.520000
gs_integrator_control=0.260000
gs_derivative_control=0.000000
gs_integrator_boundary=0.700000
gs_derivative_boundary=0.000000
yaw_damper_gain=0.000000





===============================
    Panel.cfg
===============================

//--------------------------------------------------------
[Window Titles]
Windowxx=Auto Pilota


//--------------------------------------------------------
[Windowxx]
Background_color=0,0,0
size_mm=250,350
window_size_ratio=1.000
position=0
visible=1
ident=81
window_size= 0.250, 0.350
window_pos= 0.10, 0.10

gauge00=AS532AFCP!Annunciator,0,0,250,110
gauge01=AS532AFCP!AFCP,0,110,250,130,.\hap.cfg
gauge02=AS532AFCP!GS,0,247,300,113

//--------------------------------------------------------

Note:
Replace xx with numbers in sequence
on the existing code.




===============================
    DLL.XML
C:\Users\Your User Name\AppData\Roaming\Microsoft\FSX
===============================

    <Launch.Addon>
        <Name>Helicopter AutoPilot</Name>
        <Disabled>False</Disabled>
        <ManualLoad>False</ManualLoad>
        <Path>.\HAPX.DLL</Path>
    </Launch.Addon>





===============================
    VIDEO TUTORIAL
https://www.youtube.com/watch?v=SJkuNIvgoc4
===============================

Dernière modification par Mric29 (03-06-2015 13:29:55)


Antec P280, Seasonic S12G 550w, Asus ROG Maximus VII, Intel i7 4790K 4Ghz, Corsair H60, Crucial Ballistix sport DDR3 16 Go,  Samsung Syncmaster S23B300, 7  Fam. Premium 64, Asus Geforce GTX970,  SSD Crucial 256Go, Seagate Barracuda 2To Sata III, Thrustmaster T16000, Saitek proflight throttle quadrant.

Hors ligne

 

#12 [↑][↓]  03-06-2015 08:45:44

esmdu
Pilote Virtuel
Lieu: Metz 59/02
Date d'inscription: 15-03-2008

Re: [FSX] Autopilot de Dirk Fassbender

re
bonne video..
tu parles de la gauge 'GS'..elle ne s'affiche pas chez moi non plus..  cepopossible_gif

En outre je ne l'avais plus utiliser non plus..

ma doc avait été donnée à benoit il y a 5 ans ou plus..?

je vais regarder..  merlot

http://image.noelshack.com/fichiers/2015/23/1433314270-afcp0.jpg

andré

Dernière modification par esmdu (03-06-2015 08:52:24)


YA ne ponimayu russkiy..!!
Les morts se moquent d'être vengé(s),,,,,,

Hors ligne

 

#13 [↑][↓]  03-06-2015 10:57:51

esmdu
Pilote Virtuel
Lieu: Metz 59/02
Date d'inscription: 15-03-2008

Re: [FSX] Autopilot de Dirk Fassbender

oups

http://image.noelshack.com/fichiers/2015/23/1433321800-afcp6.jpg


http://www.pilote-virtuel.com/viewtopic.php?pid=372056  cool


Bonsoir,

J'ai  téléchargé le pilote automatique pour fsx de Dirk Fassbender (hc075di_helicopter_autopilot_2009_for_fsx.zip)
http://www.dirkfassbender.de/download-1.html

J'ai ensuite téléchargé la mmise-à-jour (fsx_autopilot_update_20100323.zip)
http://www.dirkfassbender.de/autopilot.html

L'installation du pilote automatique pour le Bell 222B s'est faite selon la procédure suivante:
1/ Placer HAPX.DLL dans le dossier fsx
C:\Program Files (x86)\Microsoft Games\Microsoft Flight Simulator X

2/ Placer le fichier AS532AFCP.GAU dans le dossier Gauges de FsX

3/ Créer un dossier HAP dans la racine  C
    C:\HAP

4/ Placer dans ce dossier une copie du fichier hap.cfg

5/ Éditer le fichier panel.cfg pour y inclure (ne pas oublier une copie de sauvegarde du fichier panel.cfg avant toute modification)

WindowXX=HAP
...

//--------------------------------------------------------
[WindowXX]
Background_color=0,0,0
size_mm=300,360
window_size_ratio=1.000
position=0
visible=1
ident=81
window_size= 0.300, 0.360
window_pos= 0.650, 0.360

gauge00=AS532AFCP!Annunciator,0,0,300,110
//NO SPACES ALLOWED BEFORE THE CONFIG FILE
gauge01=AS532AFCP!AFCP,0,112,300,134,c:\HAP\hap.cfg
//NO SPACES ALLOWED BEFORE THE CONFIG FILE
gauge02=AS532AFCP!GS,0,247,300,113

Bons vols stationnaires

Benoit


ALPHA BLEU CIEL Gmax Académie RESTAURAVIA Royale French Navy

Dernière modification par esmdu (03-06-2015 11:00:19)


YA ne ponimayu russkiy..!!
Les morts se moquent d'être vengé(s),,,,,,

Hors ligne

 

#14 [↑][↓]  03-06-2015 13:27:08

Mric29
Commandant de bord
Date d'inscription: 29-04-2009

Re: [FSX] Autopilot de Dirk Fassbender

Ça marche ! Un grand merci à toi et à l'auteur de ce super pilote auto...  w00t


Antec P280, Seasonic S12G 550w, Asus ROG Maximus VII, Intel i7 4790K 4Ghz, Corsair H60, Crucial Ballistix sport DDR3 16 Go,  Samsung Syncmaster S23B300, 7  Fam. Premium 64, Asus Geforce GTX970,  SSD Crucial 256Go, Seagate Barracuda 2To Sata III, Thrustmaster T16000, Saitek proflight throttle quadrant.

Hors ligne

 

Pied de page des forums

Maintenance informatique Lausanne