#1476 [↑][↓]  12-11-2017 08:42:57

micpni
Commandant de bord
Date d'inscription: 06-08-2009
Renommée :   42 
Site web

Re: [P3D] [FSX] RFN - Support

So :
- panel Config is OK
- Simconnect, Visual C++ 2010 x86, net framework are OK
- FSX-SE/gauges is OK with 4 RFN files.
and fs panel studio reports it as "not a gauge file".

Is FSX-SE installed on C:?
Have you another partition or another disk?
We can try to had an aircraft directory out of partition c:

Dernière modification par micpni (12-11-2017 08:43:44)

Hors ligne

 

#1477 [↑][↓]  12-11-2017 08:49:03

Yuxtapuestoelmono
Nouveau pilote
Lieu: Zárate Airport (ATE)
Date d'inscription: 10-11-2017
Renommée :   
Site web

Re: [P3D] [FSX] RFN - Support

My FSX:SE installation is on a dedicated hard drive with the letter E:, you think that it being in a different drive can somehow corrupt the gauge?

Hors ligne

 

#1478 [↑][↓]  12-11-2017 09:07:21

micpni
Commandant de bord
Date d'inscription: 06-08-2009
Renommée :   42 
Site web

Re: [P3D] [FSX] RFN - Support

Sometimes, Windows protect the C:
So, if FSX-SE is on E: there is no problem

Have you try to unzip directly the gauge on the E?

Try direcdtly on E
http://royalefrenchnavy.restauravia.fr/ … erGauge.7z
http://royalefrenchnavy.restauravia.fr/ … rGauge.dll

First is with 7zip
The second is unzipped

Dernière modification par micpni (12-11-2017 09:28:10)

Hors ligne

 

#1479 [↑][↓]  12-11-2017 09:48:27

Yuxtapuestoelmono
Nouveau pilote
Lieu: Zárate Airport (ATE)
Date d'inscription: 10-11-2017
Renommée :   
Site web

Re: [P3D] [FSX] RFN - Support

Unfortunately there has been no changes, i saw that the gauge you sent me last is newer, but still the problem persists...
I have a dedicated hard drive for all my downloads, with the letter D:, i always unzip my files in that drive. Do you know of any other software for FSX that may interfere with the RFN gauge?, still that would not explain the apparent corruption of the file :S

Hors ligne

 

#1480 [↑][↓]  12-11-2017 09:56:57

Yuxtapuestoelmono
Nouveau pilote
Lieu: Zárate Airport (ATE)
Date d'inscription: 10-11-2017
Renommée :   
Site web

Re: [P3D] [FSX] RFN - Support

Do i need any file in my MODULES folder?, perhaps from a previous version or from some related gauge/software?
I just followed the indication given by FSPS about trying to disable "resolve gauge dll dependencies" in the preferences and now the RFN TACAN gauge APPEARS in FSPS (and only in FSPS).

Dernière modification par Yuxtapuestoelmono (12-11-2017 09:59:08)

Hors ligne

 

#1481 [↑][↓]  12-11-2017 11:23:47

micpni
Commandant de bord
Date d'inscription: 06-08-2009
Renommée :   42 
Site web

Re: [P3D] [FSX] RFN - Support

Third-party software can interfere with and disrupt the functioning of the gauge (eg FSInn, Addon Manager, Couatl, SODE, RAAS, ...).
I think it is the last way to look for.

Hors ligne

 

#1482 [↑][↓]  12-11-2017 12:38:42

Yuxtapuestoelmono
Nouveau pilote
Lieu: Zárate Airport (ATE)
Date d'inscription: 10-11-2017
Renommée :   
Site web

Re: [P3D] [FSX] RFN - Support

Well i do not have any of those, plus, i have been running my FSX only with FS Real Time for testing.
I think that maybe i am missing some file from the MODULES folder, but my installation of FSX is complete and proper, i just checked, can you tell me of any modules related to or required by the RFN gauge that i need to have in the MODULES folder please?

Hors ligne

 

#1483 [↑][↓]  12-11-2017 14:39:19

micpni
Commandant de bord
Date d'inscription: 06-08-2009
Renommée :   42 
Site web

Re: [P3D] [FSX] RFN - Support

I have only FSUIPC on Modules folder.
But it is not required with the RFN gauge.

Hors ligne

 

#1484 [↑][↓]  12-11-2017 15:15:23

Yuxtapuestoelmono
Nouveau pilote
Lieu: Zárate Airport (ATE)
Date d'inscription: 10-11-2017
Renommée :   
Site web

Re: [P3D] [FSX] RFN - Support

Yes same here, i can provide you the FSUIPC.log file if you need. If there is no dependencies for this gauge that i may be missing then i do not know what else can be a problem, like i said before, turning that option off in FSPS allowed me to see the gauge in the editor and interact with it there, but only on FSPS, the situation on the simulator remains the same :S
What are the dependencies for the gauge?, simconnect?, maybe my version of simconnect is not proper?, any other dependencies?

Hors ligne

 

#1485 [↑][↓]  12-11-2017 15:36:56

micpni
Commandant de bord
Date d'inscription: 06-08-2009
Renommée :   42 
Site web

Re: [P3D] [FSX] RFN - Support

I have only 2 versions of SimConnect
v10.0.61259.0 (4.98Mo)
v10.0.62615.0 (284Mo)

Perhaps en interference on your computer, but I don't think that.
Can you try to delete the two old version?
SimConnect client 10.0.60906.0
SimConnect client 10.0.61242.0
Be carefull.

Dernière modification par micpni (12-11-2017 15:41:12)

Hors ligne

 

#1486 [↑][↓]  12-11-2017 16:34:07

Chouette1037
Nouveau pilote
Date d'inscription: 09-10-2017
Renommée :   

Re: [P3D] [FSX] RFN - Support

Merci Micmi et D5. Tout est rentré dans l'ordre. Très simple, encore fallait-il savoir quelles touches programmer! A nous l'air du large...

Hors ligne

 

#1487 [↑][↓]  12-11-2017 16:41:51

Yuxtapuestoelmono
Nouveau pilote
Lieu: Zárate Airport (ATE)
Date d'inscription: 10-11-2017
Renommée :   
Site web

Re: [P3D] [FSX] RFN - Support

I was reading, the older versions just means my FSX:SE is compatible with older (RTM and SP1) add-ons and software for FSX, nothing else.

Hors ligne

 

#1488 [↑][↓]  12-11-2017 18:47:12

micpni
Commandant de bord
Date d'inscription: 06-08-2009
Renommée :   42 
Site web

Re: [P3D] [FSX] RFN - Support

Go to the folder
C:\Users\username\AppData\Roaming\Microsoft\FSX-SE (or FSX)
make a back up of the fsx_se.CFG (or fsx.CFG) file.
Open this file with notepad
Go the the [Trusted] section
Look for the RFN gauge as this line
F:\Steam\steamapps\common\FSX\gauges\RFN_CarrierGauge.dll.cwteunttialbluukeahnnkwobtonbzweeeoncbin=2
Delete this line and start FSX-SE (may be other same line to delete)
Have you a validation message for the RFN gauge?

Dernière modification par micpni (12-11-2017 18:47:46)

Hors ligne

 

#1489 [↑][↓]  12-11-2017 23:20:28

Yuxtapuestoelmono
Nouveau pilote
Lieu: Zárate Airport (ATE)
Date d'inscription: 10-11-2017
Renommée :   
Site web

Re: [P3D] [FSX] RFN - Support

I reinstalled .NET 1.x, 2.x and 3.5, but the problem still persists, i also cleared the gauge permission in the fsx.cfg and of course it asked me to authorize the gauge, but i still can not use the gauge in the simulator.

Hors ligne

 

#1490 [↑][↓]  13-11-2017 10:26:20

micpni
Commandant de bord
Date d'inscription: 06-08-2009
Renommée :   42 
Site web

Re: [P3D] [FSX] RFN - Support

At this time, I have no more idea because all situations are investigated.
If it is a new problem, I am very interested by the solution.
I hope somebody can help us.
If I have another idea, I will give it you.
But, if you find by yourself the solution, please, let me know what you do.

Dernière modification par micpni (13-11-2017 10:28:46)

Hors ligne

 

#1491 [↑][↓]  13-11-2017 14:32:02

Yuxtapuestoelmono
Nouveau pilote
Lieu: Zárate Airport (ATE)
Date d'inscription: 10-11-2017
Renommée :   
Site web

Re: [P3D] [FSX] RFN - Support

Well yes of course, this is some very bad luck, i was really looking forward to use the gauge, i even started to make some configurations for the ARA V2 25 de Mayo and for the Kiev Class aircraft carriers.

Hors ligne

 

#1492 [↑][↓]  14-11-2017 21:35:27

Yuxtapuestoelmono
Nouveau pilote
Lieu: Zárate Airport (ATE)
Date d'inscription: 10-11-2017
Renommée :   
Site web

Re: [P3D] [FSX] RFN - Support

Do you know the programmer of the RFN gauge?, maybe we can suggest him/her to update the gauge to .NET 4.x?

Hors ligne

 

#1493 [↑][↓]  15-11-2017 13:07:23

micpni
Commandant de bord
Date d'inscription: 06-08-2009
Renommée :   42 
Site web

Re: [P3D] [FSX] RFN - Support

Thank you for the suggestion, Yuxta.

Hors ligne

 

#1494 [↑][↓]  15-11-2017 18:57:29

Yuxtapuestoelmono
Nouveau pilote
Lieu: Zárate Airport (ATE)
Date d'inscription: 10-11-2017
Renommée :   
Site web

Re: [P3D] [FSX] RFN - Support

tongue that was nothing, any clue on what can be the issue?, i progressed as far as i could with the carrier configurations, but i need to use the gauge to complete what is left.

Hors ligne

 

#1495 [↑][↓]  17-11-2017 01:50:43

Yuxtapuestoelmono
Nouveau pilote
Lieu: Zárate Airport (ATE)
Date d'inscription: 10-11-2017
Renommée :   
Site web

Re: [P3D] [FSX] RFN - Support

I have been poking around here and there, do you have a way to see if my simconnect "installation" is ok and is not "leaking"?, because i read that sometimes there are issues with the simconnect that can lead to failed communication between software modules.
Is there an FSUIPC version of this gauge?

Hors ligne

 

#1496 [↑][↓]  17-11-2017 07:22:43

micpni
Commandant de bord
Date d'inscription: 06-08-2009
Renommée :   42 
Site web

Re: [P3D] [FSX] RFN - Support

RFN gauge is the only full gauge for naval operations including Meatball, LSO, catapult launch, TACAN, ...
No more idea at this time to help you.

Hors ligne

 

#1497 [↑][↓]  18-11-2017 22:01:52

micpni
Commandant de bord
Date d'inscription: 06-08-2009
Renommée :   42 
Site web

Re: [P3D] [FSX] RFN - Support

Hi Yuxta
Can you try to desabled Advanced services. NET Framework4.7?
You have to go in Configuration panel/Program/Enable or disable functionalities.
But I don't know if it is the solution in this situation.

Hors ligne

 

#1498 [↑][↓]  19-11-2017 21:36:58

Yuxtapuestoelmono
Nouveau pilote
Lieu: Zárate Airport (ATE)
Date d'inscription: 10-11-2017
Renommée :   
Site web

Re: [P3D] [FSX] RFN - Support

Hello!, i will try that as soon as i can get access to my computer, thanks!

Hors ligne

 

#1499 [↑][↓]  20-11-2017 05:16:03

Yuxtapuestoelmono
Nouveau pilote
Lieu: Zárate Airport (ATE)
Date d'inscription: 10-11-2017
Renommée :   
Site web

Re: [P3D] [FSX] RFN - Support

I did what you asked but unfortunately the problem persists :S, FSX asked me to re trust the gauge (i had deleted the fsx.cfg the day before to rebuild it), but then as i tried to load it it just flashed once and nothing more.

Hors ligne

 

#1500 [↑][↓]  20-11-2017 07:55:03

micpni
Commandant de bord
Date d'inscription: 06-08-2009
Renommée :   42 
Site web

Re: [P3D] [FSX] RFN - Support

OK, we look for an another solution, but we don't know when we will find.
No more idea at this time, but we would like to know the cause.

Dernière modification par micpni (20-11-2017 08:22:17)

Hors ligne

 

Pied de page des forums

Maintenance informatique Lausanne